Basic Info.
Heating Mode
Transmission
Operational Method
Continuous
Product Description
Main uses and features:
The disc dryer is a highly efficient continuous drying equipment. Widely used in chemical, pharmaceutical, pesticide, food, feed, agricultural and sideline products processing and other industries drying operations. Now it manufactures three types of normal pressure, airtight and vacuum. 1200, 1500, 2200, 3000 four specifications, A (carbon steel), B (part of the contact material is evenly stainless steel), C (on the basis of B, increase the steam line, the main shaft and bracket is stainless steel, cylinder body and top cover Lined with stainless steel).
working principle:
The wet material is continuously added from the feeder to the first drying tray on the upper part of the dryer. The arm of the loquat leaf is rotated so that the loquat leaf is continuously turned. The material flows along the exponential helix across the surface of the drying pan. The material on the small drying pan is transferred to the outer edge and falls on the outer edge to the outer edge of the large drying pan below. The material moves inwards in the pan and falls from the middle. Fall into the next layer of small dry dishes. The size of the drying trays are arranged alternately above and below. The materials can be continuously flowed through the dryer. The hollow drying tray is filled with heating medium. The heating medium is in the form of saturated steam, hot water and heat transfer oil. The heating medium enters from one end of the drying tray. From the other end, the dried material falls from the last layer of the drying tray to the bottom layer of the shell and is finally moved by the lobe leaves to the discharge outlet. The wet content escapes from the material and is discharged from the dehumidification port on the top cover. discharge. The moisture of the vacuum disk dryer is drawn by the vacuum pump port located on the top cover. Dry material discharged from the bottom can be packaged directly. By adding fin heaters, solvent recovery condensers, bag filter, dry material counter-mixing mechanism, induced draft fan and other auxiliary machines, it can increase its dry production capacity. Dry paste-like and heat-sensitive materials allow easy solvent recovery and pyrolysis and reaction operations.
Features:
(1) Easy control and strong applicability
A. The drying process can be optimized by adjusting the thickness of the material layer, the spindle speed, the number of cymbals, the type and size of the blister leaf.
B. Each layer of drying plate can be individually heated into a hot medium or a cold medium, heating or cooling the material. The temperature control of the material is accurate and easy.
C. The residence time of the material can be precisely adjusted.
D. Single material flow, no backmixing, uniform drying, stable quality, no need to mix.
(2) Simple and easy to operate
A. The driving and parking operation of the disc dryer is very simple.
B. After the feed is stopped, the transport of the material scale leaves the material in the dryer quickly.
C. Through the special large size inspection of the door mirror, the inside of the device can be cleaned and observed very carefully.
(3) Low energy consumption
1, the material layer is Pu, the spindle speed is low, the material transmission system requires less power, less power consumption.
2. Dry with conductive heat, high thermal efficiency and low energy consumption.
(4) Operating environment is good, solvent can be recovered, dust emission meets requirements
A. Atmospheric pressure Because of the low air velocity in the equipment and the high and low temperature distribution inside the equipment, it is difficult for dust to float to the top of the equipment. Therefore, the exhaust gas discharged from the top moisture outlet contains almost no dust.
B. Closed type Dispensing solvent recovery device can easily recover the organic solvent in the carrier gas. 3. Vacuum type The disc dryer operated under vacuum condition is especially suitable for the drying of heat-sensitive materials.
(5) Easy installation and small footprint
A. The whole dryer is shipped from the factory and the whole transportation. It only needs to be lifted in place and the installation and positioning are very easy.
B. Because of the dry disk layout, vertical installation, even if the drying area is large, the floor space is very small.
Technical characteristics:
(a) Drying tray
1, the design pressure is generally 0.4MPa, up to 1.6MPa
2. The maximum operating pressure is generally <=0.4 MPa and the highest is 1.6 MPa.
3, heating medium: steam, hot water, heat transfer oil, when the drying plate temperature is 100 °C with hot water heating, 100 °C ~ 150 °C with <=0.4 MPa saturated steam or superheated steam heating, 150 °C ~ 320 °C with heat conduction Oil heating, >320 °C can be used when electricity, guided oil, molten salt heating.
(b) Material Transfer System
1, spindle speed 1 ~ 10 minutes, electromagnetic or variable frequency stepless speed regulation.
2. Arms There are 2-8 arm arms fixed on the main shaft on each drying plate.
3, leaves Spliced in the arm, with the disk surface to maintain contact with floating, there are many forms.
4. Rolling For easy agglomeration and materials that need to be crushed, adding roll in place will enhance the heat transfer and drying process.
(c) Housing
There are atmospheric, closed, vacuum three forms
1. Normal pressure cylinder or octagonal prism, with integral and split two structures. The heating medium inlet and outlet main ducts may be inside or outside the housing.
2, closed type cylindrical shell, can withstand 5Kpa internal pressure, heating medium import and export of the main pipe can be in the shell, but also outside the shell.
3. Vacuum type Cylindrical shell, the design pressure is 0.1Mpa, and the heating medium inlet and outlet pipes are in the shell.
(D) Air heater
It is generally used under large evaporation to enhance the drying efficiency.
Technical Parameters:
Specifications | Outside diametermm | Heightmm | Dry area m2 | Power kw | Specifications | Outside diametermm | Heightmm | Dry area m2 | Power kw |
1200/4 | 1850 | 2608 | 3.3 | 1.1 | 2200/18 | 2900 | 5782 | 55.4 | 55 |
1200/6 | 3028 | 4.9 | 2200/20 | | 6202 | 61.6 | |
1200/8 | 3448 | 6.6 | 1.5 | 2200/22 | | 6622 | 67.7 | 75 |
1200/10 | 3866 | 8.2 | 2200/24 | | 7042 | 73.9 | |
1200/12 | 4288 | 9.9 | 2200/26 | | 7462 | 80.0 | |
1500/6 | 2100 | 3022 | 8.0 | 2.2 | 3000/8 | 3800 | 4050 | 48 | 11 |
1500/8 | 3442 | 10.7 | 3000/10 | | 4650 | 60 | |
1500/10 | 3862 | 13.4 | 3000/12 | | 5250 | 72 | |
1500/12 | 4282 | 16.1 | 3.0 | 3000/14 | | 5850 | 84 | |
1500/14 | 4702 | 18.8 | 3000/16 | | 6450 | 96 | |
1500/6 | 5122 | 21.5 | 3000/18 | | 7050 | 108 | 13 |
2200/6 | 2900 | 3262 | 18.5 | 3.0 | 3000/20 | | 7650 | 120 | |
2200/8 | 3682 | 24.6 | 3000/22 | | 8250 | 132 | |
2200/10 | 4102 | 30.8 | 3000/24 | | 8850 | 144 | |
2200/12 | 4522 | 36.9 | 4.0 | 3000/26 | | 9450 | 156 | 15 |
2200/14 | 4942 | 43.1 | 3000/28 | | 10050 | 168 | |
2200/16 | 5362 | 49.3 | 5.5 | 3000/30 | | 10650 | 180 | |
Address:
Jinniu Mountain Avenue East 139, Yingkou, Liaoning, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Agriculture & Food, Chemicals, Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, HACCP
Company Introduction:
Our company supplies different kinds of products. We stick to the principle of "quality first, service first, continuous improvement and innovation to satisfy the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality and reasonable price.
The company pay great attention to the cooperation of the road, ang the Ocean University of China, DalianUniversity of Technology, Henan University of Technology to establish contact with a number of university an scientific research institutes, information, technology exchange, continued access to technological progress and innovation, among the forefront of the industry.
Yingkoi Chenguangcompany is willing to share the fruits of development with all walks of life, and jointli promote the development of the industry!